P1:

Start up the slab being cautious on the loose rock.  It's not hard but the poor quality of the rock will have you moving slow.  Wander around trying to stick to the "good rock" and placing some gear along the way heading for the bolt visible below the crack on the little headwall.  The slab protected mostly with finger to hand sized gear but a #5 is optional.  Aid through the crack with small cams and a few pins, then two mantels will put you on the first summit.   Gear belay. 100' 5.8R A2.

P2:

Stem across the gap between the two towers.  You can fiddle in a couple shady .3 cams before you do the slab moves out of the gap but they are not inspiring.  20' 5.7 PG13.

Descent:

Rappel 60' back to the notch from bolts with chain.

Description

Location

Protection

Routes in The Orthrus